SMS TAKEDO-3VF, Руководство пользователя

Страница: 3 / 75

TAKEDO - 3VF NXP USER MANUAL Release P09.1 dated 01-12-2017
3
A
QUICK GUIDE TO PUTTING ON DUTY
OPEN LOOP ASYNCHRONOUS MOTORS
(without encoder)
1) Make all connections as indicated in the manual.
2) Check the following parameters:
Parameter Description Unit SMS setting Value to be set Value
S6.1 Language Italian
Select according to
country of use
S6.2 Application AsynchMotor AsynchMotor
3) Enter data in the following parameters:
Parameter Description Unit SMS setting Value to be set Value
P2.1.2 Motor Nominal Voltage
V
400 Motor rating plate data
P2.1.3 Motor Nominal Frequency
Hz
50
Motor rating plate data
P2.1.4 Motor Nominal Speed
RPM
1440
Motor rating plate data
P2.1.5 Motor Nominal Current
A
I Inverter
Motor rating plate data
P2.1.6 Motor Cos Phi 0.82 Motor rating plate data
P2.1.7.1 Lift Rated Speed m/sec 0.70 LIFT data
P2.1.7.2 Pulley Diameter mm
520 LIFT data
P2.1.7.3 Gear Ratio
1.58 LIFT data
P2.1.7.4 Ropes Ratio 1:1
LIFT data
P2.1.7.5 Update Data No Yes
4)
Run IDENTIFICATION Routine
:
- Set parameter P2.1.8 to “ ID No Run” and make a call command: the contactors energizes, the brake
doesn’t open, and “RUN” lights up.
- When the “RUN” light goes off, “STOP” appears and parameter P2.1.8 automatically turns to “ No
Action ”, deactivate the call (e.g. by opening the operation valve).
5) If it does not work perfectly, see the full MANUAL.