SMS TAKEDO-3VF, Руководство пользователя

Страница: 4 / 75

TAKEDO - 3VF NXP USER MANUAL Release P09.1 dated 01-12-2017
4
B
QUICK GUIDE TO PUTTING ON DUTY
CLOSED LOOP ASYNCHRONOUS MOTORS
(with encoder)
1) Make all connections as indicated in the manual.
2) Check the following parameters:
Parameter Description Unit SMS setting Value to be set Value
S6.1 Language Italian
Select according to
country of use
S6.2 Application AsynchMotor AsynchMotor
3) Enter data in the following parameters:
Parameter Description Unit SMS setting Value to be set Value
P2.1.2 Motor Nominal Voltage
V
400 Motor rating plate data
P2.1.3 Motor Nominal Frequency
Hz
50
Motor rating plate data
P2.1.4 Motor Nominal Speed
RPM
1440
Motor rating plate data
P2.1.5 Motor Nominal Current
A
I Inverter
Motor rating plate data
P2.1.6 Motor Cos Phi m/sec 0.82 Motor rating plate data
P2.1.7.1 Lift Rated Speed m/sec 0.70 LIFT data
P2.1.7.2 Pulley Diameter mm
520 LIFT data
P2.1.7.3 Gear Ratio
1.58 LIFT data
P2.1.7.4 Ropes Ratio 1:1
LIFT data
P2.1.7.5 Update Data No Yes
P2.1.12 Encoder Type Incremental Incremental
P2.1.13 Encoder Direction Not inverted
Not inverted
if motor is going up
Inverted
if motor is going up
P2.5.1 Motor Control Mode Open loop Closed Loop
P2.5.4.1 Magnetizing Current A 0.5 * I Inverter
If unknown:
-
for 1/2 speed motors for
lifts, enter
1/3 of value in P2.1.5
-
for motors with inverters,
enter
2/3 of value in P2.1.5
P7.3.1.1
Pulse/revolution
(Number of encoder pulses)
1024
Number of pulses /
revolution of installed
encoder
4) If it does not work perfectly, see the full MANUAL.
5) For other accessory functions such as POWER LIMIT, ONE FLOOR TRAVEL ONLY, DIRECT FLOOR
ARRIVAL etc. see the full manual.