Smiths Medical LEVEL 1 HOTLINE HL-90-40 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 54

Smiths Medical LEVEL 1 HOTLINE HL-90-40 Скачать руководство пользователя страница 42

S E C T I O N 1 2

•

S e r v i c e

36

HOTLINE

®

Blood and Fluid Warmer | Operator’s Manual

SECTION 12

Service

WARNINGS

WARNINGS

• No user-serviceable parts. All service must be performed by

Smiths Medical or competent personnel. Death or serious injury
may occur if this warning is not followed.

All service must be performed by Smiths Medical or competent personnel.
Service by any other person or organization voids the warranty and
transfers liability for malfunctions of the device to the servicing
organization.

Non-Warranty Work

Devices received that are no longer under warranty can be returned for
repair at a cost. The device will be promptly inspected and a verbal
estimate of the repair cost will be provided. A purchase order will be
required from the original purchaser consistent with the verbal estimate. A
written estimate will be provided upon request.

Before returning the HOTLINE

®

Warmer for service, contact Smiths

Medical for Returned Goods Authorization. Be sure that ALL recirculating
solution is drained from the device before packing the HOTLINE

®

Warmer for shipment.

Note: The HOTLINE

®

Warmer must be cleaned and disinfected for repair

shipment or it will be immediately returned as received.

Additional Documentation

Upon request Smiths Medical will provide the following documentation:

• Circuit diagrams

• Components parts list(s)

• Description of function

• Service and calibration instructions

«
...
40
41
42
43
44
...
»

Содержание LEVEL 1 HOTLINE HL-90-40























































Отзывы:

Нет отзывов