background image

Smiths Medical ASD, Inc.

6000 Nathan Lane North

Minneapolis, MN 55442, USA

Tel: 1-614-210-7300

Toll-Free USA: 1-800-258-5361 

www.smiths-medical.com 

Product(s) described may not be licensed or available for sale in Canada 

or other countries outside of the United States.

CADD, CADD-Legacy, the Medication Cassette Reservoir and the Smiths Medical 

design mark are trademarks of Smiths Medical. The symbol ® indicates the 

trademark is registered in the U.S. Patent and Trademark Office and certain other 

countries. ©2017 Smiths Medical. All rights reserved. IN19882EN-112017

A. 

Display shows 

programming information 

and messages

B. 

Power Jack used to plug in 

AC Adapter

C. 

Accessory Jack used to 

plug in Remote Dose Cord

D. 

Indicator Light indicates 

AC power in use

E. 

Air Detector

F. 

Cassette (part of reservoir 

or administration set that 

attaches to pump)

G. 

Threaded Mounting Hole 

for use with Polemount 

Bracket Adapter (back of 

pump)

H. 

Battery Compartment 

(back of pump)

I. 

Cassette Latch attaches 

cassette to pump (side of 

pump)

CADD-Legacy

®

 PCA

Infusion Pump Model 6300

Quick Reference Card for Clinicians Lock Level 0 (LL0)

For more information, please visit 

www.smiths-medical.com

G

H

I

A

B

C

E

D

F

Read the entire Operator’s Manual before operating the CADD-Legacy

®

 ambulatory 

infusion pump. Failure to properly follow warnings, cautions and instructions could 

result in death or serious injury to the patient. Please see the instructions for use for 

a complete listing of the  indications contraindications, warnings and precautions. 

Warning: This Quick Reference Card should be used by clinicians only. Do not permit 

patients to have access to this card, as the information would allow access to all 

programming and operating functions. Assistance with the CADD-Legacy

®

 PCA pump 

is available to clinicians by calling 1-800-258-5361.

IN19882EN-112017.indd   1

11/01/18   11:49

Содержание 6300











Отзывы: