Smiths Medical 1818R, Руководство по эксплуатации и обслуживанию

Страница: 25 / 59

Chapter 3: Using the Oximeter
3-6 Oximeter Operation and Service Manual
Attach the Sensor to the Oximeter
• Attach the sensor connector to the oximeter’s PATIENT CABLE/
SENSOR connector.
• If you need the extra length of the patient cable, attach the sensor
to the patient cable, then attach the patient cable to the oximeter’s
PATIENT CABLE/SENSOR connector.
Measuring the Patient’s % SpO
2
and Pulse Rate
To begin measuring the patient’s SpO
2
and pulse rate, press the “
R
” key.
When turned on, the oximeter goes through this power-up sequence:
• The pulse strength bar graph segments light one at a time.
• The oximeter's software revision is momentarily displayed.
• The patient number for spot check printouts is momentarily dis-
played. The format for the patient number display is “P” followed
by the number. For example,
P14
means the patient number is 14.
Figure 3-6: Attach the
Sensor to the Oximeter