manualshive.com logo in svg

Smithco 10-100-F, Запчасти и обслуживание, Страница: 97 / 120

Поделиться
Скачать
Smithco 10-100-F Скачать руководство пользователя страница 97

 95

Accessories

1101  MANUAL HOSE REEL PLUMBING DRAWING

 REF#  PART# 

DESCRIPTION 

QUANTITY

 

1 

15-776 

Tee 

1

 

2 

15-740 

50 Series Clamp 

3

 

3 

15-738 

Ball Valve 

1

 

4 

15-749 

Hose Barb 

1

 

 

INSTALLATION INSTRUCTIONS

  1.  Disconnect the ball valve from the bottom of the filter assembly. Install tee fitting (15-776) between the 

ball valve and the elbow. Use the clamp that was removed and one of the new ones provided. Only 

tighten clamps enough so it can be rotated.

  2.  Install hose barb (15-749) onto the ball valve (15-738) using a 50 series clamp (15-740) Tighten clamp. 

Install the ball valve/hose barb to the tee (15-776) that was installed in step 1 using a 50 series clamp 

(15-740).

  3.  Rotate the tee fitting so the valve points toward the outside of the machine. Tighten all clamps.
  4.  Route the 3/4" Black hose from the hose barb you installed in step 2 to the hose barb on the hose reel. 

Secure with 18-040 Hose clamps.

  5.  When installing the hose reel with a manual spray system you will have parts left over that you will not 

need.

Содержание 10-100-F

























































































































Отзывы:

Нет отзывов