Smithco 10-100-F, Запчасти и обслуживание, Страница: 110 / 120

108
Accessories
10-734 16 GALLON RINSE TANK
REF# PART# DESCRIPTION QUANTITY
1 HB-516-18-075 Hex Bolt,
5
/
16
-18 x
3
/
4
2
HW-516 Flat Washer,
5
/
16
2
HNFL-516-18 Flange Whiz-loc Nut,
5
/
16
- 18 2
2 10-738 Mounting Bracket 2
3 HSTP-516-18-100 Truss HEad Screw,
5
/
16
-18 x 1 2
HNFL-516-18 Flange Whiz-loc Nut,
5
/
16
- 18 2
4 HB-516-18-075 Hex Bolt,
5
/
16
-18 x
3
/
4
2
HNFL-516-18 Flange Whiz-loc Nut,
5
/
16
- 18 2
5 10-737 Rinse Tank Mount 1
6 HB-516-18-200 Hex Bolt,
5
/
16
-18 x 2 1
HNTL-516-18 Lock Nut,
5
/
16
- 18 1
You will have to drill 2 holes in the Floorboard of your Sprayer.
2. Mount the two mounting brackets (Ref 2) on the rinse tank mount(Ref 5) using
3
/
4
" bolts and flange
whiz-loc nuts (Ref 2).
1. Center the rinse tank mount on the front bumper and mark one
5
/
16
hole on the front tubing and 2 on the
rear of the floorboard where the mounting bracket lines up
3. Drill through the front tubing.
4. Place the 2" bolt (Ref 6) and fasten with a lock nut.
5. Drill the two holes in the floorboard. Using the 2 truss head screws and flange whiz-loc nuts(Ref3) se
-
cure the back of the rinse tank mount to the bottom of the floorboard.
6. Use the slots in the mounting brackets to adjust and tighten mount to main frame. Tighten all bolts.
7. Mount the 16 gallon tank on the rinse tank mount (Ref 5) using the
5
/
16
hardware.
8. Make sure bolts are all tightened.