manualshive.com logo in svg

Smithco 10-100-F, Запчасти и обслуживание, Страница: 109 / 120

Поделиться
Скачать
Smithco 10-100-F Скачать руководство пользователя страница 109

 107

Accessories

10-653 FRESH WATER WASH TANK -FRONT MOUNT

 REF#  PART# 

DESCRIPTION 

QUANTITY

 

1 

10-652 

Mount Plate 

1

 

2 

HB-516-18-075 

Hex Bolt, 

5

/

16

 - 18 x 

3

/

4

 4

 

 

HWL-516 

Lock Washer, 

5

/

16

 4

 

 

HW-516 

Flat Washer, 

5

/

16

 4

 

3 

10-234 

Wash Tank 

1

 

4 

17-537 

Square U-Bolt 

2

 

5 

16-158 

Close Nipple 

1

 

6 

16-151 

Elbow 

1

 

7 

16-960 

Spigot 

1

 

INSTALLATION INSTRUCTIONS 

  1.  Fresh Water Wash Tank mounts on the left side Roll Bar.
  2.  Mount the wash tank (Ref 3) onto the mount bracket (Ref 1)using four 

5

/

16

 x 

3

/

4

 bolts, washers and lock

-

washers (Ref 2). Tighten.

  3.  Install the nipple (Ref 5), elbow (Ref 6) and spigot (Ref 7)into the bottom of wash tank (Ref 1). Use 

thread tape on all threads.

  4.  Mount the tank assembly to the left side Roll Bar with u-bolts (Ref 4). Tighten.
  5.  Rinse tank with clear water and check for leaks around  fittings.

This tank is for fresh clear water ONLY. Do not put chemicals in this tank.

Содержание 10-100-F

























































































































Отзывы:

Нет отзывов