manualshive.com logo in svg

Smithco 10-100-F, Запчасти и обслуживание, Страница: 3 / 120

Поделиться
Скачать
Smithco 10-100-F Скачать руководство пользователя страница 3

 1

Introduction

INTRODUCTION

Thank you for purchasing a 

Smithco

 

product.

Read this manual and all other manuals pertaining to the Spray Star 1110  carefully as they contain safety, op

-

erating, assembly and maintenance instructions. Failure to do so could result in personal injury or equipment 

damage.
Keep manuals in a safe place after operator and maintenance personnel have read them. Right and left sides 

are from the operator’s seat, facing forward.

All 

Smithco

 machines have a Serial Number and Model Number. Both numbers are needed when ordering 

parts. The serial number plate on the Spray Star 1110 is located on the right front bumper.  Refer to engine 

manual for placement of engine serial number. Refer to engine manual for placement of engine serial number. 

For product and accessory information, help finding a dealer, or to register your product please contact us at 

www.Smithco.com.
Information needed when ordering replacement parts:
  1.  Model Number of machine
  2.  Serial Number of machine
  3.  Name and Part Number of part
  4.  Quantity of parts

For easy access record your Serial and Model numbers here.

SMITHCO CUSTOMER SERVICE  1-800-891-9435

WARNING

Failure to follow cautious operating practices can re-

sult in serious injury to the operator or other persons. 

The owner must understand these instructions, and 

must allow only trained persons who understand these 

instructions to operate this vehicle.

WARNING:

      

Engine exhaust and some of its constituents are 

known to the State of California to cause cancer, 

birth defects, and other reproductive harm. 

 For more information visit 

www.P65Warning.ca.gov

Содержание 10-100-F

























































































































Отзывы:

Нет отзывов