manualshive.com logo in svg

Smithco 10-100-F, Запчасти и обслуживание, Страница: 101 / 120

Поделиться
Скачать
Smithco 10-100-F Скачать руководство пользователя страница 101

 99

Accessories

10-740 FOAM MARKER CONTROL PANEL

 

REF# PART# 

DESCRIPTION 

QUANTITY

 

1 

10-739 

Switch Mount Plate 

1

 

 

15-725 

Panel Mount End 

2

 

2 

15-782 

Switch, Unlit 

1

 

 

15-727 

Rocker, No Light 

1

 

3 

15-918 

Switch, 2 Red LED 

1

 

 

15-917 

Rocker, 2 Red Lenses 

1

 

4 

30-374 

Decal, Foamer 

1

Safety: Before working on machine stop engine, set park brake, remove 

key from ignition and block wheels. Disconnect negative (-) battery termi-

nal.

 

  1.  Place decal(Ref 4) on Switch mount plate. Place panel mount ends in mount plate. 
  2.  Mount switches (Ref 2 & 3) to switch mount plate (Ref 1)as shown above. Mount the switch mount 

plate(Ref 1) on the side control panel using existing bolts. 

 

Tank Mount Drawing 

  3.  Position the right and left hand mount brackets(Ref 2 and 4) on the boom tubes facing the front of the 

machine, using two 

5

/

16

 x 3 bolts. Install the foamer plate (Ref 5) on the right  and left bracket with curve 

towards poly spray tank.

  4.  Place the piece of trim (Ref 13) on the foamer bracket to prevent rubbing of hoses for a cleanload sys

-

tem.

  5.  Place foamer unit onto mount plate, with cap facing to the right  side of machine. Using ¼ bolts and 

flange nuts, bolt foam marker to mount plate. The left rear mount of the foamer will bolt through the 

mount plate and brace. Tighten all hardware.

  6.  Make sure all bolts are tightened.

Содержание 10-100-F

























































































































Отзывы:

Нет отзывов