Smeg WD3060, Руководство пользователя

Страница: 27 / 36

WD3060 - WD5090 USER MANUAL 27
ALARM ID DISPLAY MESSAGE MEANING AND SUGGESTED USER ACTION
ID29
“Washing chamber drainage
failed”
Chamber does not empty. No drainage.
.Check the connection to the water drain,
especially that the height of the drain connections complies with
the specified requirements and that there are no restrictions in
the drain hoses.
ID30
“Safety chamber level exceeded”
During the working cycle, the chamber water level exceeds the
safety level.
Check the water supply to the appliance:
1. Intake pressure.
2. That the connections are correctly set, as specified.
ID31
“Safety level
Safety level failed”
.The same checks as for ID30
ID32
“Sump full
Turn the taps off”
Water standing in washing chamber with appliance in standby.
.The same checks as for ID30
ID33
“Lack of water
in the Condenser”
Steam condenser water intake anomaly.
Check the water supply:
1. Intake water pressure
2. That the connections are correct, as specified in this manual.
3. Blockages or restrictions in hoses.
4. Check intake water hardness (hard water contribute to steam
condenser nozzles obstruction).
ID34
“Condenser Drainage
failed”
Steam condenser water drainage failure.
Check that the drain connections are correct:
1. Height and position of the drain connection
2. That the connections are correct, as specified in this manual.
3. Blockages or restrictions in hoses.
ID37
“Not reached Target
Cooled Drainage”
Drainage problems when using a mixture of water. The use of a
mixture of water is an option adopted in special cases to cool the
water discharged into the drain.
Check:
1. The intake water temperature; if the water is not cold enough
(recommended T<25°C) there may be difficult in achieving the
target temperature.
2. Problems with drain; check that the hoses and drain
connections meet the specified requirements.
ID38
“Cooled Drainage
failed”
.The same checks as for ID37
ID41
“Detergent 1
Inflow failed”
. Check the detergent presence.
. Check that the detergent intake nozzle is correctly positioned in
the tank.
. Check for detergent leaks (pools of detergent around the
device).
ID42,
ID43,
ID44, ID45
“Detergent 2, 3, 4, or 5
Inflow failed”
.The same checks as ID41, for the detergents 2, 3, 4, 5.
ID46
“Pump tube 1
clogged”
.The same checks as for ID41