WD3060 - WD5090
USER MANUAL
15
PR:
PLASTIC 70°C + Dry
F0 PREWASH
PRELOADING
TL 19.5 TC 19.8
RunT 0:00:20
Fig. 6 - screen of the programming which is running
PR:
PLASTIC 70°C + Dry
PROGRAM ENDED
OPEN THE DOOR?
Fig. 7 - “Program ended” screen.
7.4
HALTING A PROGRAM IN PROGRESS
To interrupt a program in progress: press
STOP.
Once the button is pressed, the program switches to pause state:
The door can only be opened until the temperature is less than 40°C, by pressing
ENTER
Restart the cycle within 60 seconds by pressing
START.
7.5
PERFORMING A STAND-ALONE DRYING CYCLE
The drying phase is set for every program (except for prewash programs) by default.
To
start a “stand-alone” drying phase
:
Press “
LEFT
” from the menu of the selected program.
The drying phase activation screen appears: press
ENTER
to confirm the start of drying (or press
ESC
if you prefer to go
back to the previous screen).
Parameters on the display
during drying:
o
Phase name
o
TA1
: Drying System temperature probe;
o
TT
: phase target temperature;
o
RunT
: time passed.
DRYING
Confirm?
Fig. 8 - drying cycle selection screen:
Confirm with
ENTER.
PR:
DRYING
DRYING
TA1 74.5
TT 80.0 RunT 0:00:55
Fig.
9
- screen: drying cycle in progress.
At the end of the phase, open the door and wait a few minutes before extracting the instruments, to allow both the well and the
processed material to cool down (the drying phase concludes with a cooling phase).
