Starting from the October 2002 production and progressively in all models, the fixing nut of the tap to the bar has been
replaced. The nut has been increased in order to facilitate the micro-switch hooking start up. The picture below shows
the nut dimensions.
At the same time the knobs dimensions (descreased) have been changed (inox and black plastic) to fit them to the
new nut. The old and new codes are indicated in the table below:
Old knob fot nut 892610264
New knob for nut 892610286
Code
Description
Code
Description
892610264
VALVE TAP NUT
SX93VG
892610286
VALVE TAP
NUT CX61VG
694971699
TAP KNOB GR S852X
694975086
TAP KNOB
GRSUK61MFX
694974938
TAP KNOB
GRCB61VJME
694975141
TAP KNOB GR
SB93VGMA
694974977
TAP KNOB GR
SX91VJME
694975142
TAP KNOB GR SX91VJM
694975033
TAP KNOB GR A1-2SE
694975143
TAP KNOB GR SP71VGL
15. Linked documents
Service bulletin
CUC-SB2002-01-Ignition_mswitch_assembly_FS_cookers-GB.pdf
CUC-SB2002-03-New thermocouple nut and washer-GB.pdf
CUC-SB2002-04-New_commutator_cookers90X60TF-GB.pdf
CUC-SB2003-01-Enlarged oven shelves-GB.pdf
CUC-SB2003-02-New_hinge_supp_CUC_90-100X60-GB.pdf
43