9. Detail of the side overlapping the hob.
Now it is possible to work under the hob, to take out the cup, remove the 2 fixing screws (if it is a TRC burner, triple
crown or also the ultra rapid, there are 4 screws) of the cup burner (picture 10); taking the cup burner as shown in the
picture below.
ATTENTION: in case you work on the cup burner not fixed to the hob, be careful to DO NOT FORCE the flexing
operation of the Bundy pipe; this can cause possible leakages and it can compromise THE TIGHTNESS OF THE
BURNER. In case it is necessary to replace the sparking plug or the thermocouple which is hard to reach by only
removing the right or left side, proceed with the complete removal of the hob. (see photo 12).
10.For the fixing screws of the cup burner to the
hob, it is necessary to have the stork's joins.
Removal of the 2 fixing screws of the cup burner (if
it is a TRC burner, ultra rapid, the screws are 4.)
29
