- 21 -
PC
(The PC should be obtained separately.)
位置
速度
100
500
200
1000
50
200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現在位置
120.3
現在速度
200
mm
mm/s
動作中
アラーム
モニタ
設定
位置
速度
100
500
200
1000
50
200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現在位置
120.3
現在速度
200
mm
mm/s
動作中
アラーム
モニタ
設定
PLC, etc.
(The PLC, etc. should be obtained separately.)
(2) Connection with a PC
Controller setting kit
Controller
Caution
(1) Do not connect to equipment other than specified (LEC-W1, LEC-W2, LEC-T1, LEC-G).
When connected to equipment which is not specified, the product will be damaged by incorrect
signal wiring.
(2) When connecting the cable, make sure that no electrically conductive materials are present in
the connector insertion port.
(3) In the LEC-W1, the 0V of the driver and PC is not insulated.
If the 0V and the PC ground are common and the PC ground makes contact with another
voltage, an excessive voltage might be applied to the driver, causing damage to the
driver.
4.4 CN5: Parallel I/O connector
Controller
CN5
Please refer to
“6.4 Parallel I/O Wiring Example”
for how to wire the CN5 connector.
Please refer to
"6.3 The parallel I/O signal is detailed"
for details of each signal of parallel I/O.
CN4
Communication
cable
USB cable
(A-miniB type connector)
I/O cable
