HRX-OM-R039
Chapter 4 Starting the Product
4.4
Starting and Stopping
HRSE Series
4-6
Except in case of emergency, do not turn off the power supply switch
until the product has stopped completely. Doing so could cause
failure.
4.4.2
Stopping the product
1.
Press the [RUN/STOP] button on the operation panel.
The [RUN] lamp on the operation panel flashes green at 1 second intervals, and
continues operation to prepare to stop. After approx. 15 seconds, the [RUN] lamp goes
off and the product stops.
Fig. 4.4-2 Stopping the product
2.
Turn OFF the electrical leakage breaker of the user's equipment, and disconnect the
power supply to the thermo chiller.
Be sure to shut off the breaker of the facility power supply (the user’s
machine power supply) before wiring.
Also, drain the circulating fluid, etc. from the product in accordance
with and put into storage properly
(Referring to "7.4.1 Discharge of the circulating fluid".)
Flash
OFF
等
Press