HRX-OM-R039
Chapter 4 Starting the Product
4.2
Preparation for Start
HRSE Series
4-2
4.2 Preparation for Start
4.2.1
Power supply
Turn ON the electrical leakage breaker of the user's equipment, and supply
power to the thermo chiller.
* For 100 V power supply specification, connect the plug to the outlet with
grounding (JIS C8303 Plug for the receptacle for 15A and 125 V with dipole
grounding electrodes).
When the product is switched on, the operation panel displays the following
conditions.
The initial screen (HELLO screen) is displayed for 8 seconds on the operation
display panel. Then, the display changes to the main screen which displays
the circulating fluid outlet temperature.
The set value of circulating fluid temperature is displayed as SV on the panel.
The present value of circulating fluid temperature is displayed as PV on the
panel.
Fig. 4.2-1 Power supply
4.2.2
Setting of circulating fluid temperature
Press the [
▼
] and [
▲
] buttons on the operational panel to change the SV to
required value.
Fig. 4.2-2 Setting of circulating fluid temperature
Press
L
N
E
Earth
Earth leakage
breaker
E
Grounded socket
