![background image](http://html1.mh-extra.com/html/smc-networks/ce2/ce2_user-manual_1299285009.webp)
6
3. Do not pull sensor cable strongly.
Such action may cause failure.
4.
Water shall be kept away from the sensor unit to
avoid failure. (IP65 Protection)
5. Power supply line
Do not mount any switch or relay to power
supply line (12 VDC to 24 VDC).
Measurement
Caution
SMC products are not intended for use as
instruments for legal metrology.
Measurement instruments that SMC manufactures
or sells have not been qualified by type approval
tests relevant to the metrology (measurement) laws
of each country. Therefore, SMC products cannot
be used for business or certification ordained by the
metrology (measurement) laws of each country.
Maintenance and Check
Warning
1. Performing regular check
Check regularly that the products do not operate
with failures unsolved. Check should be done
by trained and experienced operators.
2. Dismantling of product and supply/exhaust
of compressed air.
Before dismantling, ensure that drop preventing
and runaway preventing treatments are properly
provided, shut the power source of air supplied,
and exhausts compressed air in the system.
When starting operation again, operate the
product with care after ensuring that a treatment
for preventing extrusion is properly provided.
3. Prohibition of disassembly and modification
To prevent accidents such as failures and
electric shocks, do not remove the cover to
perform disassembly or modification. If the
cover has to be removed, shut off the power
before removal.
4. Disposal
Request a special agent for handling industrial
waste to dispose the products.
!
Operating
range
Welding machine
!
Содержание CE2
