SMC Networks CE2, Руководство пользователя

Страница: 16 / 53

１３
3. SPECIFICATIONS
3-1 Cylinder Specifications
Bore Size
φ40 φ50 φ63 φ80 φ100
Operating Fluid Air (Non-Lubricated)
Proof Pressure Drive Pressure : 1.5MPa Brake Pressure : 0.75MPa
Max. Operating Pressure Drive Pressure : 1.0MPa Brake Pressure : 0.5MPa
Min. Operating Pressure Drive Pressure : 0.1MPa Brake Pressure : 0.3MPa
Piston Speed 50
～
500mm/s
Ambient Temperature 0
～
60
℃
Maximum Stroke (Standard) 850mm 800mm 800mm 750mm 750mm
Brake Type Integrated Pneumatic and Spring
Sensor Cord Length & Type
φ7
－
500mm & Oil Resistant
Hardware JIS B0209
3-2 Controller Specifications
Type CEU2 CEU2P
Model Nomenclature Controller
Mounting Surface Mounting (Din Rail or Screw)
Operating Modes
PRESET
・
PROGRAM
・
RUN
Display Back lighted Display
Position Setting Capacity 1
－
16 Programs, Each Program 1
－
32 steps
Position Control Method PTP(Point To Point)
Control Axes One Axis
Position Setting Method Key Input to Controller
Position Setting Range 9999.9mm
Min. Setting Range 0.1mm
Memory 8kbyte Static RAM (5-Year Battery Backup)
Min. Setting Interval 5mm and above
Input Signal
START, GOHOME, PROGRAM#, PAUSE, EMERG, STOP, SETHOME
RESET, AUTO/MANUAL, IN/OUT(Manual mode only)
Output Signal Move Completed, At Home, Program End, Error
Controlled Output
NPN Open Collector
(DC30V, 50mA)
PNP Open Collector
(DC30V,50mA)
Power Supply AC100V±15%, 50Hz/60Hz & DC24V±10%, 0.4A
Operating Temp. Range
0
℃～
50
℃
Operating Humidity Range 25
%
～
85
%
Shock Resistance
10
～
55Hz, Amplitude 0.75mm Each Axis for 2 hours
Noise Resistance
Square Wave (1μs Pulse Width)
±1500V at Power Terminal, 600V at Input Terminal
Impact Resistance 10G, 3 times at each axis
Proof Voltage
AC1500V, 1Min(less than 3mA) , between Case & AC Line
AC500V, 1Min(less than 3mA) , between Case & 12VDC
Current Consumption Below 1.0A
Insulation Resistance
DC500V with Above 50MΩ, between Case & AC Line
Mass 690g