Command Line Interface
4-382
4
Example
The following shows how to statically configure a multicast group on a port:
This command configures the IGMP snooping version. Use the
no
form to restore
the default.
Syntax
ip igmp snooping version
{
1
|
2
|
3
}
no ip igmp snooping version
•
1
- IGMP Version 1
•
2
- IGMP Version 2
•
3
- IGMP Version 3
Default Setting
IGMP Version 2
Command Mode
Global Configuration
Command Usage
• This command configures the IGMP report/query version used by IGMP
snooping. Versions 1 - 3 are all supported, and versions 2 and 3 are backward
compatible, so the switch can operate with other devices, regardless of the
snooping version employed.
• Some commands are only enabled for IGMPv2 and/or v3, including
ip igmp
snooping querier, ip igmp snooping query-max-response-time
,
ip igmp
snooping query-interval
, and
ip igmp snooping immediate leave
.
Example
The following configures the switch to use IGMP Version 1:
This command enables IGMP leave proxy on the switch. Use the
no
form to disable
the feature.
Syntax
[
no
]
ip igmp snooping leave-proxy
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12 ethernet 1/5
Console(config)#
Console(config)#ip igmp snooping version 1
Console(config)#
Содержание 6152PL2 FICHE
