SMC Networks 6152PL2 FICHE, Руководство по управлению

Страница: 616 / 818

Command Line Interface
4-238
4
auto-traffic-control release-timer
This command sets the time at which to release the control response after ingress
traffic has fallen beneath the lower threshold. Use the
no form to restore the default
setting.
Syntax
auto-traffic-control { broadcast | multicast } release-timer seconds
no auto-traffic-control { broadcast | multicast } release-timer
• broadcast - Specifies automatic storm control for broadcast traffic.
• multicast - Specifies automatic storm control for multicast traffic.
• seconds - The time at which to release the control response after ingress
traffic has fallen beneath the lower threshold. (Range: 1-900 seconds)
Default Setting
900 seconds
Command Mode
Global Configuration
Command Usage
The release timer only applies to a rate limiting control response set by the
auto-traffic-control action command (page 4-241). When a port has been
shut down by a control response, it must be manually re-enabled by the no
shutdown command (page 4-227).
Example
This example sets the release timer to 800 seconds for all ports.
auto-traffic-control
This command enables automatic traffic control for broadcast or multicast storms.
Use the
no form to disable this feature.
Syntax
[ no ] auto-traffic-control { broadcast | multicast }
• broadcast - Specifies automatic storm control for broadcast traffic.
• multicast - Specifies automatic storm control for multicast traffic.
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet)
Console(config)#auto-traffic-control broadcast release-timer 800
Console(config)#