HGMS61 Genset Controller User Manual Page 22 of 47
No.
Items
Range
Default
Description
19
Gen Under Speed
Shutdown
(0~6000)r/min 1200
When the engine speed is under the value
for 10s, shutdown alarm signal is sent out.
20
Gen
Over
Speed
Shutdown
(0~6000)r/min 1710
When the engine speed is over the point for
2s, shutdown alarm signal is sent.
21
Gen Under Frequency
Shutdown
(0~75.0)Hz
45.0
When generator frequency is lower than the
value (not equal to 0) for 10s, shutdown
alarm signal is sent.
22
Gen Over Frequency
Shutdown
(0~75.0)Hz
57.0
When generator’s frequency is over the
value and continues for 2s, shutdown alarm
signal is sent.
23
High
Temperature
Stop
(80~300)ºC
98
When engine temperature sensor value is
over this value, it sends out high temp.
alarm. This value only be judged after the
end of safety delay, and only for the
temperature sensor connected outside.
When the value is 300, warning alarm won’t
be sent. (only suites for temperature sensor,
except for high temp. pressure alarm signal
inputted by programmable input port )
24
Low Oil Pressure
Shutdown
(0~400)kPa
103
When engine oil pressure sensor value is
under this value, Low Oil Pressure alarm is
sending out. This value only judged after the
end of safety delay. When the value is 0,
warning alarm won’t be sent. (only suites for
oil pressure sensor, except for low oil
pressure
alarm
signal
inputted
by
programmable input port)
25
Low
Fuel
Level
Warning Value
(0~100)%
10
When fuel level sensor value under this
value and remains for 10s, genset will send
out warning alarm, only warn but not
shutdown.
26
Loss Of Speed Signal
Delay
(0~20.0)s
5.0
When the delay setting as 0s, it only warn
but not shutdown.
27
Charge
Alternator
Fail
(0~30.0)V
6.0
During genset normal running, when B+ and
charger D+ (WL) voltage difference is above
this value for 5s, the controller will issue
Failed To Charge warning.
28
Battery Over Voltage
(12.0~40.0)V
33.0
When battery voltage is over the value and
remains for 20s, battery over voltage signal
is active. it only warn but not shutdown.
