HGM7110DC Genset Controller
HGM7110DC Genset Controller Version: 1.0 2014-09-27 Page
8
of
68
Collects and shows parameters:
Accumulator
Accumulator Voltage (after the compensation)
Accumulator Temperature
Accumulator Charge Current
Accumulator Discharge Current
Load
Current
Generator Current
Accumulator over voltage, under voltage protection functions;
3 fixed analog sensors (temperature, oil pressure and liquid level);
2 configurable sensors can be set as sensor of temperature, oil pressure or fuel level;
Precision measure and display parameters about Engine,
Temp. (WT) °C/°F both be displayed
Oil pressure (OP) kPa/Psi/Bar all be displayed
Fuel level (FL) %(unit)
Speed (SPD) r/min (unit)
Voltage of Battery (VB) V (unit)
Voltage of Charger (VD) V (unit)
Hour count (HC) can accumulate to max. 65535 hours.
Start times can accumulate to max. 65535 times.
Protection: automatic start/stop of the genset, perfect fault indication and protection
function;
All output ports are relay-out;
Parameter setting: parameters can be modified and stored in internal FLASH memory
and cannot be lost even in case of power outage; most of them can be adjusted using
front panel of the controller and all of them can be modified using PC via USB or RS485
ports.
More kinds of curves of temperature, oil pressure, fuel level can be used directly and
users can define the sensor curves by themselves;
Multiple crank disconnect conditions (speed sensor, oil pressure) are optional;
Widely power supply range DC(8~35)V, suitable to different starting battery voltage
environment;
Event log, real-time clock and Scheduled start & stop function (can be set as start genset
