HGM7110DC Genset Controller
HGM7110DC Genset Controller Version: 1.0 2014-09-27 Page
42
of
68
8.2 PROGRAMMABLE OUTPUT PORTS
Form 2
No.
Type
Description
0
Not Used
1
Reserved
Details of function description please see the
following.
2
Reserved
3
Reserved
4
Reserved
5
Reserved
6
Reserved
7
Custom Combined 1
8
Custom Combined 2
9
Custom Combined 3
10
Custom Combined 4
11
Custom Combined 5
12
Custom Combined 6
13
Reserved
14
Reserved
15
Reserved
16
Reserved
17
Air Flap Control
Action when over speed shutdown and emergence
stop. It can close the air inflow to stop the engine as
soon as possible.
18
Audible Alarm
Action when warning, shutdown, trips. Can be
connected annunciator externally. When “alarm
mute” configurable input port is active, it can
remove the alarm.
19
Louver Control
Action when genset start and disconnect when
genset stopped completely.
20
Fuel Pump Control
It is controlled by limited threshold of fuel pump.
21
Heater Control
It is controlled by limited threshold of heater.
22
Cooler Control
It is controlled by limited threshold of cooler.
23
Oil Pre-supply Output
Action fro
m “crank on” to “safety on”.
24
Reserved
25
Pre-Lubricate
Actions in period of pre-heating to safety run.
26
Remote Control Output
This port is controlled by communication (PC).
27
GSM Power Supply
Power for GSM module (GSM module is reset
when GSM communication failed).
28
Reserved
29
Close Gen Output
Control generator to take load.
