HGM6100U Series Automatic Control Module
HGM6100U Automatic Genset Controller ISSUE 2014-10-28 Version 1.2 Page 5 of 39
2 PERFORMANCE AND CHARACTERISTICS
HGM6100U
controller has four variants:
HGM6110U/6110UC:
Automatic Start Module, it controls generator to start/stop by
remote start signal;
HGM6120U/6120UC:
Based on
HGM6110U/6110UC
, it adds mains AC monitoring
and mains/generator automatic switching control (AMF), especially suitable for the
automation system composed by mains and genset.
Note1: HGM6110UC/6120UC
has RS485 port,
HGM6110U/6120U
without.
Note2: HGM6110UC/6120UC
is taken as an example to describe in this manual.
132*64 LCD display with backlight, optional language interface (Chinese, English,
Spanish and Russian), push-button operation;
Acrylic screen, improved wearable and scratch resistance property;
Silica-gel panel and keys can well adapt to higher and lower temperature;
With RS485 communication port, can achieve
“
three remote
”
functions via
MODBUS protocol;
Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz AC power
system;
Can measure and display 3 phase voltage, 3 phase current, frequency, power
parameter of mains/gens;
Mains
Generator
Line voltage (Uab, Ubc, and Uca) Line voltage (Uab, Ubc, and Uca)
Phase voltage (Ua, Ub, and Uc) Phase voltage (Ua, Ub, and Uc)
Frequency HZ Frequency HZ
Load
Current IA, IB, IC
Active power KW
Reactive power KVar
Apparent power KVA
Power factor PF
Generator accumulated energy kWh
Mains have functions of over/under voltage and lack of phase; Gens have functions
of over/under voltage, over/under frequency and over current;
Precision measure and display of parameters about engine,
