HGM6100U Series Automatic Control Module
HGM6100U Automatic Genset Controller ISSUE 2014-10-28 Version 1.2 Page 21 of 39
No.
Items
Range
Default
Description
13
Start Idle Time
(0-3600)s
0
Idle running time of genset
when starting.
14
Warming Up Time (0-3600)s
10
Warming
time
between
genset switch on and high
speed running.
15
Coolant Time
(3-3600)s
10
Time
for
cooling
before
stopping.
16
Stop Idle Time
(0-3600)s
0
Idle running time when genset
stop.
17
ETS Time
(0-120)s
20
Stop electromagnet’s power
on time when genset is
stopping.
18
Over Stop Delay
(0-120)s
0
If “ETS
output time
”
set as 0,
it is the time from end of idle
delay to gen-set at rest; if not
0, it is from end of ETS
solenoid delay to gen-set at
rest
19
Switch
Close
Delay
(0-10)s
5.0
Mains
’
or generator
’
s switch
closing pulse width, when it is
0, output is continuous.
20
Flywheel Teeth
(10-300)
118
Number of flywheel teeth, it
can
detect
disconnection
conditions and engine speed.
21
Genset Abnormal
Delay
(0-20.0)s
10.0
Over or under volt alarm
delay
22
Genset
Over
Voltage shutdown
(30-620)V
264
When genset voltage is over
the point, generator over
voltage is active. When the
point is 620V, generator over
voltage is disabled.
23
Genset
Under
Voltage
(30-620)V
196
When generator voltage is
under the point, generator
under voltage is active. When
the point is 30V, generator
under voltage is disabled.
24
Under
Speed
shutdown
(0-6000)RPM
1200
When the engine speed is
under the point for 10s,
shutdown alarm signal is sent
out.
25
Over
Speed
shutdown
(0-6000)RPM
1710
When the engine speed is
over
the
point
for
2s,
shutdown alarm signal is sent.
