HGM6100U Series Automatic Control Module
HGM6100U Automatic Genset Controller ISSUE 2014-10-28 Version 1.2 Page 22 of 39
No.
Items
Range
Default
Description
26
Under Frequency
shutdown
(0-75.0)Hz
45.0
When generator frequency is
lower than the point (not
equal to 0) for 10s, shutdown
alarm signal is sent.
27
Over Frequency
shutdown
(0-75.0)Hz
57.0
When generator
’
s frequency
is
over
the
point
and
continues for 2s, generator
over frequency is active.
28
High Temperature
shutdown
(80-140)ºC
98
When engine temperature
sensor value is over this
point, it sends out high temp.
alarm. When the value is 140,
warning alarm won
’
t be sent.
(only suited for temperature
sensor, except for high temp.
pressure
alarm
signal
inputted by programmable
input port )
29
Low Oil Pressure
shutdown
(0-400)kPa
103
When engine oil pressure
sensor value is under this
point, Low Oil Pressure alarm
is sending out. When the
value is 0, warning alarm
won
’
t be sent. (only suited for
oil pressure sensor, except for
low oil pressure alarm signal
inputted by programmable
input port)
30
Low Fuel Level
(0-100)%
10
When fuel level sensor value
under this point and remains
for 10s, genset send out
warning alarm, only warn but
not shutdown.
31
Loss Of Speed
Signal Delay
(0-20.0)s
5.0
When the delay setting as 0s,
it only warn but not shutdown
32
Charge Failure
(0-30)V
6.0
During generator is running,
when
charge
alternator
WL/D+ voltage is under this
point and remain for 5s,
generator will warning alarm
and shutdown.
33
Battery
Over
Voltage
(12-40)V
33.0
When
generator
battery
voltage is over the point and
remains for 20s, battery over
voltage signal is active. it only
warn but not shutdown
