Important information
4
l
Wait five minutes before removing accessories from the
display’s OPS slot to allow the accessory to cool.
IMPORTANT
The following table includes the normal operating power
requirements for the display:
Models
Regulatory
Models
Power requirements
SBID-
GX165
IDGX65-1
100V to 240V AC, 50
Hz to 60 Hz, 117 W
SBID-
GX175
IDGX75-1
100V to 240V AC, 50
Hz to 60 Hz, 157 W
SBID-
GX186
IDGX86-1
100V to 240V AC, 50
Hz to 60 Hz, 175 W
For additional requirements and other information, refer to the
display’s specifications (see
ENERGY STAR®
ENERGY STAR is the government-backed symbol
for energy efficiency, providing simple, credible,
and unbiased information that consumers and
businesses rely on to make well-informed
decisions. ENERGY STAR-certified products are
the simple choice for energy efficiency, making it easy for
consumers and businesses to make purchases that save them
money and protect the environment. The U.S. EPA ensures that
each product that earns the label is independently certified to
deliver the quality, performance, and savings that users have
come to expect.
As shipped, your display delivers ENERGY STAR performance
and savings. However, changing some settings may increase
energy consumption beyond the limits required for ENERGY
STAR certification. For example, increased brightness and
contrast will increase power consumption.
Please consider the environment when you choose non-ENERGY
STAR settings.
Federal Communication Commission
interference statement
FCC
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: IDGX65-1, IDGX75-1, IDGX86-1
Responsible Party – U.S. Contact Information
SMART Technologies Inc.
2401 4th Ave, 3rd Floor
Seattle, WA 98121
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
CAUTION
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate this equipment.
Restriction
Operations in the 5.15-5.25 GHz band are restricted to indoor
usage only.
IEEE 802.11b or 802.11g operation of this product in the USA is
firmware limited to channels 1 through 13.
Radiation exposure statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance of 20 cm between
the antenna of this device and all nearby persons. This transmitter
must not be co-located or operated in conjunction with any other
antenna or transmitter.
