CHAPTER 2
MOUNTING THE INTERACTIVE FLAT PANEL
12
l
Refer to local building codes to ensure the wall can support the weight of the
interactive flat panel (specified in the following table) and mounting equipment.
Model
Weight
SMART kapp iQ Pro 55
107 lb. (48.4 kg)
SMART kapp iQ Pro 65
138 lb. (62.4 kg)
SMART kapp iQ Pro 65-V2
134 lb. (60.9 kg)
SMART kapp iQ Pro 75
185 lb. (84 kg)
l
Use a standard VESA mounting plate (not included) to mount the interactive flat panel on a
wall.
l
Use M8 screws to fasten the wall bracket.
Screw length
20 mm +
x
mm < M8 < 45 mm +
x
mm
where
x
is the combined thickness of the wall bracket and washer
Fasten force
97.36–177.01 in-lb. (11–20 N·m)
CAUTION
Do not over-tighten the screws.
NOTE
SMART recommends M8 × 30 mm mounting screws for standard installations where the
total wall mount bracket and washer thickness is less than 7 mm.
l
Because the receptacles might not be easily accessible after the installers mount the
interactive flat panel, consider connecting cables for power, computers and other devices
while the interactive flat panel is still in its packaging (see
Chapter 3: Connecting power and
l
Before turning on the interactive flat panel for the first time, clean the camera windows and
reflective tape following the instructions in
