Smart Storm Greasebuster, Инструкция по эксплуатации

Страница: 13 / 15

9.1 Wiring Connection
WARNING
Ensure the mains power supply is turned off before wiring the temperature controller.
If the heater is not to be used always leave its MCB in the “OFF” position.
Connection:
1 : 2 Thermocouple inputs (Connect in correct order else display will read negative.
5 : 4 Mains supply to heater element. Connect heater cable between 5 and supply neutral (which is available on a
flying connector)
Further information is available in the enclosed SA100 manual.
Temperature Controller
5 6
7 8
4
9
1 2
3
11 10
Temperature Controller