SMAR FI303, Руководство по эксплуатации, техническому обслуживанию и инструкциям

Страница: 36 / 54

FI303 - Operation and Maintenance Instruction Manual
3.20
Always on the LCD interface will be shown two parameters at the same time, switching between the
configured parameter at the LCD-II and the last monitoring parameter. If the user does not want to
show two parameters at the same time, it is only necessary to opt for "none" when configure the
LCD-II:
Figure 3.16 – Parameters for Local Adjustment Configuration
The user may select the “Mode Block” parameter on the display, when an index equal to this mode
should be selected.
Figure 3.17 – Parameters for Local Adjustment Configuration
With this
option, the
Mode Block
parameter is
shown at the
LCD.
Selecting “
None”, only the
last chosen
monitoring
parameter will be
shown at LCD.