SMAR FI303, Руководство по эксплуатации, техническому обслуживанию и инструкциям

Страница: 7 / 54

Installation Flowchart
VII
Installation Flowchart
Was the converter
configured on the bench
to match the application?
Configure the engineering unit.
Configure the terminal(s)
and output scale(s) .
(Section 3 - Calibration)
Configure the LCD reading.
(Section 3 - Configuration)
Simulate the values in the
input according to output scale
and verify the signals of the
output current.
Fieldbus
4 a 20 mA
Start
No
Yes
Is the indication correct?
See section 4 - Maintenance
OK
Install the converter on the field
following the instructions below.
Check the area classification
and its practices.
Install the (mechanically
and electrically) according to the
application after checking the best
position for the LCD
(Section 4 - Maintenance).
converter
Install the preferably
on wether-protected areas.
converter
Power-up the properly.
FI303 needs a external power supply
for supply the equipment .
converter
4 - 20 mA
No
Yes