SMAR FI303, Руководство по эксплуатации, техническому обслуживанию и инструкциям

Страница: 35 / 54

Configuration
3.19
In option mnemonic, the display may show the data in the numeric field and the mnemonic in the
alphanumeric field.
For devices where the software version is higher or equal to 1.10, please see the configuration of
local adjustment using the local adjustment, in the Installation, operation and maintenance
procedures manual.
In case you wish to visualize a certain tag, opt for the index relative equal to "tag". To configure
other parameters just select "LCD-II" up to "LCD-VI" windows:
Figure 3.14 – Parameters for Local Adjustment Configuration
The “Local Address Change” window allows the user to enable/disable the access to change the
equipment address.
Figure 3.15 – Parameters for Local Address Configuration
When the user enter into the local adjustment and rotate the parameters using the magnetic tool,
after escaping to normal operation, e.g, the monitoring, if the parameter when the magnetic tool is
removed has "Access Permission equal to "monitoring", then this last parameter will be shown at the
LCD.
The option “
Write” should be
selected in order
to execute the
upgrade of local
adjustment
programming tree.
After its step all
the parameters
selected will be
shonw on the
LCD display.
When the option “
enable” is selected,
the user can change
the physical device
address.