SMAR FI303, Руководство по эксплуатации, техническому обслуживанию и инструкциям

Страница: 40 / 54

FI303 - Operation and Maintenance Instruction Manual
3.24
Figure 3.21 - Step 2 - FI303
Figure 3.22 - Step 3 - FI303
Figure 3.23 - Step 4 - FI303
Remove the magnetic
tool from orifice
S .
Insert the magnetic
tool in orifice
S once
more and LOC ADJ
should be displayed.
Place the magnetic tool in
orifice
Z . In case this is the
first configuration, the option
shown on the display is the
TAG with its corresponding
mnemonic configured by the
Configuration Tool.
Otherwise, the option shown
on the display will be the
one configured in the prior
operation. By keeping the
tool inserted in this orifice,
the local adjustment menu
will rotate.
This parameter is used to
calibrate the lower current
point. In order to range the
lower value, simply insert
the magnetic tool in orifice
S as soon as lower is
shown on the display. An
arrow pointing upward (
↑
)
increment the value and an
arrow pointing downward
(
↓
) decrement the value.
Apply the 4.00 mA current
in the
1 and 4 terminals.
With the magnetic
screwdriver, adjust the
current value shown on the
display to indicate 4.00 mA.
In order to decrement
the lower value, place
the magnetic tool in
orifice
Z to shift the
arrow to the downward
position and then, by
inserting and keeping
the tool in orifice
S , it is
possible to decrement
the lower value.
This parameter is used to
calibrate the upper current
point. In order to range the
upper value, simply insert the
magnetic tool in orifice
S as
soon as upper is shown on the
display. An arrow pointing
upward (
↑
) increment the value
and an arrow pointing
downward (
↓
) decrement the
value. Apply the 20.0 mA
current in the
1 and 4 terminals.
With the magnetic tool, adjust
the current value shown on the
display to indicate 20.00 mA.