manualshive.com logo in svg

SMA Sunny Island 4248U, Инструкция по установке и эксплуатации

Поделиться
Скачать
SMA Sunny Island 4248U Скачать руководство пользователя страница 14

Preparation

 

 SI4248U Manual

6

Preparation

Lifting/Moving

The Sunny Island 4248U weighs 86 lbs. (39 kg) Be sure to use proper lifting techniques and 
secure the help of someone to assist in the installation of the inverter.

Unpacking

Retain the shipping container in case it becomes necessary to ship the inverter.

Before installing the Sunny Island 4248U, carefully unpack it and make sure that all of the 
following items are included. If anything is missing or if the inverter has been damaged in 
shipping, contact SMA America immediately. Contact information is located in the front and 
back of this manual.

• Closely inspect the shipping container and inverter for any damage
• Verify that the mounting bracket, manual and warranty card are all present
• Fill out the warranty card with the model number and serial number of the unit
• Keep all receipts together for future reference

The lid of the Sunny Island 4248U is not mounted when you receive the device. The lid is 
packed in a bag to prevent damages during shipping. You have to unpack the lid and fasten 
it to the enclosure of the Sunny Island 4248U after the installation.

Bottom Mounting Tab

The tab on the bottom of the inverter is installed upside down to prevent damage during 
transport. This tab needs to be removed and remounted so that the flange points downward 
and is flush with the back of the inverter. See illustration below.

Figure 1-4 Mounting Tab Orientation

-OUNTING4AB

"OTTOM6IEW

3IDE6IEW

-OUNTWITH
FLANGEDOWN

7ALL

7ALL

Содержание Sunny Island 4248U





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды