SMA SHP 125-US-20, Руководство по эксплуатации

Страница: 27 / 96

6 Mounting and Preparing the Connection SMA Solar Technology AG
Operating manual SHP-US-20-BE-en-10 27
3. Fasten all four screws of each mounting bracket hand-tight (TX40).
4. Ensure the correct position of the mounting brackets by hooking in the mounting template. If
the position is incorrect, move the mounting brackets to the correct position.
5. Tighten all four screws of each mounting bracket (TX40, torque: 12 Nm ± 2 Nm (106 in-lb ±
17.7 in-lb)).
6. Clip the mounting template into the mounting brackets.
7. Align the cable conduits by means of the mounting template and shorten if necessary. Take the
product depth of 400 mm (15.8 in) into account.
8. Check on the connection plate whether the seal is
present and undamaged.
9. Attach the conduit fittings for attachment of the
conduits to the connecting plate.
2
1
10. Lead the cables through the conduit fittings in the
connecting plate and align the connecting plate
using the mounting template.
2
1
11. Remove the mounting template.