Sleipner PJC421, Руководство пользователя, Страница: 9 / 52

9
6770 2 2021
-
PJC421 & PJC422
Muted alarms
Return to dashboard view
Clear active alarms
Control Panel - Alarms
MC_0407
Alarm list, muted audible alarm signal
All active alarms are still listed after the audible alarm signal is muted.
Clear active alarms have the same functionality as when the audible alarm signal is not muted.
Immediate Stop alarm
If the STOP button on TP-35 is pushed, a STOP message will be sent to all thrusters connected to the S-Link bus. An audible alarm signal will be given,
and a notice will be displayed on the screen. The thrusters will immediately stop after receiving the STOP message and then broadcast the STOP
Activated message.
If the STOP Activated message is not received by TP-35 within 1 second after the STOP button is pushed, the STOP notice will be closed.
The STOP button must be pushed for 2 seconds to disable the stop function.
Pressing the STOP button with a hydraulic controller connected to the S-Link bus will activate the dump valve and all hydraulic consumers will be
disabled.
The STOP Activated message will be displayed on all Sleipner control panels that are turned on.
Return to the dashboard view
Clear all active alarms. A command is sent to all devices connected to the S-Link bus to clear active alarms. If the alarm state is
still present in a device, a new alarm will be triggered in TP-35 and the audible alarm signal will be reactivated.