Sleipner PJC421, Руководство пользователя, Страница: 23 / 52

23
6770 2 2021
-
PJC421 & PJC422
MC_0105
Considerations and Precautions for S-Link Systems
When installing an S-Link™ system DO NOT connect any other control equipment directly to the S-Link™ bus except original Sleipner S-Link™ products.
In case of connecting third-party equipment, it must always be connected through a Sleipner-supplied interface product.
Any attempt to directly control or connect into the S-Link™ control system without a designated and approved interface will render all warranties and
responsibilities of all of the connected Sleipner products.
If you are interfacing the S-Link™ bus by agreement with Sleipner through a designated Sleipner supplied interface, you are still required to install at
least one original Sleipner control panel to enable efficient troubleshooting if necessary.
TP-35 Control Panel Installation
The TP-35 has two mounting options.
Top Mount
For the simplest installation the top mount design sits on the console board.
Flush Mount
The flush mount allows for a sleek and seamless display option exposing only the main screen, operation buttons and minimised panel surface.
(NB: For flush installations you must have adequate access to the back surface of the dash board to allow for the installation process)
When deciding your installation preference ensure to.
1. Find a suitable location for the control panel where it does not obstruct or is obstructed by other devices. Install the control panel on a flat
surface where it is easy to use.
2. Ensure the panel should be mounted 20 cm away from any compass to ensure that the accuracy of the compass is not affected.
3. If the panel is mounted in an weather exposed location mounting the covering is recommended when the panel is not used.
MC_0395
MG_0463
Top Mount
Flush Mount