Sleipner PJC421, Руководство пользователя, Страница: 10 / 52

10
6770 2 2021
-
PJC421 & PJC422
Control Panel - Menu Navigation
MC_0407
Confi gure connected S-Link devices, panel behavior and joysticks. For DNV product variants Station Control Settings can be
confi gured.
Settings
Menu navigation
Main Menu
Active menu
Indicates menu items
outside of the screen
Indicate that up and down
buttons can be used for
menu navigation
Access selected menu
item. Defi nes functionality
of Right Selection button
Currently selected
menu item
Return to the previous menu or
cancel the current menu option.
Defi nes functionality of Left
Selection button
Panel buttons and touch screen functionality can be both used to operate the TP-35 control panel. The functionalities of the Selection buttons are
defi ned by different icons located in the lower left and lower right corners of the screen. Use the up and down buttons to navigate between menu
items when the icon is displayed.
Settings menu
Lists and confi gure devices connected to the S-Link bus.
Lists TP-35 serial number and fi rmware version.
Select joystick type and perform calibration.
Only available on DNV product variants. Activate and confi gure the transfer of command functionality.
System Devices
Panel Settings
Joystick
Settings
Station Control
Settings
Control Panel - Menu Navigation
MC_0407
Exit the System Devices menu and associate all listed devices to the control panel.
Select desired device for confi guration.
System Devices
All units connected to the S-Link bus is listed in the System Devices menu. A device must be associated to the control panel to enable communication
with the device.
When exiting the System Devices menu all listed devices are associated to the control panel. Once a device is associated the device type and unique
serial number is stored in the control panel.
To disassociate a device that is disconnected from the S-Link bus the System Devices menu must be accessed. The disconnected device will no longer
be present in the list, and when exiting the System Devices menu it will be automatically disassociated from the control panel.
To ease the installation and confi guration of connected devices it is recommended to fi ll out the list found in chapter List of installed S-Link devices of
this manual.
List of devices connected to the
S-Link bus
Number of devices connected to
the S-Link bus.
Set the location for selected device.
• Bow (default)
• Stern
• Bow Starboard
• Stern Starboard
Use Bow or Stern in conventional thruster system.
In a system with two bow or two stern thrusters, for example, a catamaran. Use Bow or Stern for the port thruster. For starboard
thrusters, use Bow Starboard or Stern Starboard.
Set the running direction for the thruster.
• Normal (default)
• Swapped
Confi gure thruster type.
• SAC - Tunnel thruster (default)
• SRAC – Reserved for future functionality
Set the maximum thrust of the thruster. Value between 50% and 100% can be chosen (default 100%). PDC-301 will scale the
joystick signal to this value.
Set the maximum thrust if both bow and stern thrusters are operated at the same time. Value between 0% and 100% can be
chosen (default 100%).
The Load Sharing limitation allows the system to limit the combined load on the generator when bow and stern thrusters are
operated at the same time. The load sharing will dynamically limit the thrust request for each thruster depending on the joystick
position and limit settings. For a detailed explanation and setup guide, see AC series thruster user manual, document ID 6054.
Location
Thrust Direction
Function
Max Output
Load Share
Limit
PDC-301 Confi guration
The proportional drive controller PDC-301 for AC thrusters has several parameters that can be confi gured.
Serial number and fi rmware
version of selected device.
Parameters that can be
confi gured.