Sleipner PJC421, Руководство пользователя, Страница: 29 / 52

29
6770 2 2021
-
PJC421 & PJC422
Measurement
code
Measurement description
mm inch
H Panel Height 123.4 4.9
W Panel width 105.5 4.1
(a) Raised height above the dashboard 111.3 4.4
(b) Depth behind the dashboard (not inc. cables) 94.7 3.7
(c) Cable bend radius 35 1.4
PJC421
MC_0387
PJC421-PVREL Measurements
MG_0467
1 2 3
4
Connect both
joystick cables to
the T-connector.
Connect cable between
T-connector and TP-35
(X1 Joystick).
Joystick cables can be connected
in any arrangement to the two
upper sockets
TP-35 cable must
be connected to
the lower socket
PJC422-PVREL Control Panel Installation
1. Place the supplied cut-out template on the desired installation location.
2. Cut out the area according to the template.
3. Plug both cables from the control panel into a S-Link T-connector. Connect the T-connector cable into the cable/ connector at the rear of the
TP-35 control panel. (NB: During the TP-35 panel installation this cable may already be attached if access to the back side of the control panels
is impossible.)
4. Insert the control panel in place and fasten screws.
MC_0396