Page 46
December 2007
ZB2044
Start Operation
Section 2 - Operation
2.10-4 Steering the Telehandler
Steering is controlled by means of the steering wheel
in conjunction with the steering mode selector rocker
switch for the type of steering desired.
Round Steer
This steer mode is most commonly used on the job site
and will give the smallest turn radius available.
Figure 2-11 Round Steering
Front Steer
Two-wheel steer is used during road travel in order to
reduce the risk of possible overturn due to over-steering.
NOTE
Loss of electrical power will allow front
steering only.
Figure 2-12 Front Steering
Crab Steer
The crab steer is used for maneuvering into tight spots.
Figure 2-13 Crab Steering
2.10-5 Leveling the Telehandler
1.
To level frame to the right, move frame level
joystick to the right. To level frame to the left, move
frame level joystick to the left.
2.
Release joystick to stop.
2.10-6 Raising or Lowering Boom
WARNING
Ensure that there are no personnel or
obstructions and there is sufficient room
to perform all telehandler functions.
1.
To raise the boom, pull boom/attachment joystick
backward. To lower the boom, push boom/
attachment joystick forward.
2.
Release joystick to stop.
To
order
go
to
Discount-Equipment.com
