Page 42
December 2007
ZB2044
Function Tests
Section 2 - Operation
• Test Parking Brake
CAUTION
Refer to
Section 2.10-3
for instructions
on how to drive on a slope.
1. Ensure path of intended motion is clear.
2. Ensure parking brake switch is off.
3. Drive the telehandler on a slope.
4. Depress service brake pedal slowly until
telehandler stops.
5. Select parking brake rocker switch to
on position and release service brake
pedal.
Result:
Parking brake indicator light
should turn on and telehandler should not
roll
• Test Outriggers (If Equipped)
WARNING
Ensure that there are no personnel or
obstructions in test area and that there
is sufficient room to test all telehandler
functions.
1. Ensure parking brake switch is on.
2. Lower outriggers by depressing and
holding rocker switch forward “
”
continuously.
Result:
Outriggers should lower.
3. Raise outriggers by depressing and
h o l d i n g r o c k e r s w i t c h b a c k w a r d
“
” continuously until outriggers are
fully raised.
Result:
Outriggers should raise up.
This unit is equipped with rear axle tilt lock,
which is energized when red light is lit.
Never attempt to level frame when boom is
elevated or when red light is lit.
WAR NING
A
152222AA
152218AA
A
All turbo-engines
air cleaner and exhaust
must be sealed during
transport.
NOTICE
Parking Brake
Switch
Outriggers
Switches
To
order
go
to
Discount-Equipment.com
