Page 58
December 2007
ZB2044
Optional Attachments
Section 2 - Operation
2.15-5 Pipe and Pole Handler
Pipe and pole handler allows the operator to position,
remove and stack support posts used in the construction
of bridges and highways. It can also handle other pipes
and/or poles, and vertically position them.
Figure 2-25 Pipe and Pole Handler
Installation Procedure:
1.
Remove fork attachment or other attachment
from boom and install pipe and pole handler
attachment (refer to
Section 2.13
).
2.
Connect auxiliary hydraulic hoses to attachment.
3.
Route electrical harness supplied with attachment
up through centre of sub-carriage and between tilt
cylinders, ensuring it will not be damaged during
operation.
4.
Remove top electrical connector on 3-way diverter
valve and attach to electrical connector of harness
supplied with attachment.
5.
Tighten connector screw and confirm the
functionality of the handler.
Operation:
1.
Approach load with handler’s clamps open.
2.
Position handler so that load is in the center of
clamps.
3.
Close clamps by moving joystick “
” rearward
and transport load to placement
site.
4.
Press and hold “
” the left thumb button and
move joystick “
” rearward to rotate the pole
and pipe handler clockwise.
5.
Press and hold “
” the left thumb button and
move joystick “
” forward to rotate pole and
pipe handler counter-clockwise.
6.
Position load carefully over placement point and
open the clamps by moving the joystick “
”
forward .
2.15-6 Hydraulic Winch
Hydraulic winch is used to raise and lower loads
vertically such as lowering equipment into a shaft with
limited access.
Figure 2-26 Hydraulic Winch Attachment
Installation Procedure:
1.
Remove fork attachment or other attachment
from boom and install winch attachment (refer to
Section 2.13
).
2.
Connect auxiliary hydraulic hoses to attachment.
WARNING
Only qualified service personnel should
install hydraulic winch.
Operation:
1.
Attach load to winch hook using proper cables or
chains and move joystick “
” backward to
winch up the load.
To
order
go
to
Discount-Equipment.com
