Skyjack ZB12032, Руководство по эксплуатации

Страница: 34 / 73

TM
ZB12032
December 2007 Page 35
Function Tests Section 2 - Operation
2.8 Function Tests
Function tests are designed to discover any malfunctions
before telehandler is put into service. The operator must
understand and follow step-by-step instructions to test
all telehandler functions.
impORTANT
Never use a malfunctioning telehandler. If
malfunctions are discovered, telehandler
must be tagged and placed out of service.
Repairs to telehandler may only be made
by a qualified service technician.
After repairs are completed, operator must perform a
pre-operation inspection and a series of function tests
again before putting telehandler into service.
Prior to performing function tests, be sure to read and
understand
Section 2.9 - Start Operation.
wARNiNG
Ensure there are no personnel or
obstructions in test area and there is
sufficient room to test all telehandler
functions.
2.8-1 Operator’s Cab Controls
wARNiNG
Ensure that you maintain three points of
contact to mount/dismount the cab.
1. Enter cab and close door (if equipped).
wARNiNG
Always wear seat belt when operating
this vehicle.
2. Sit in the driver’s seat and fasten seat belt.
3. Using a spotter, adjust the mirrors.
4. Ensure parking brake is engaged.
5. Adjust the boom controller console.
Steering
Wheel
Controllers
Console
Ignition
Switch
Transmission
Lever
Boom/Attachment
Controller
Frame Level
Controller
Controllers
Console
Adjuster