Skyjack ZB12032, Руководство по эксплуатации

Страница: 26 / 73

TM
ZB12032
December 2007 Page 27
Visual and Daily Maintenance Inspections Section 2 - Operations
2.7 Visual & Daily Maintenance
Inspections
Before performing the visual and daily maintenance
inspections, ensure that the telehandler is parked on a
firm level surface.
Begin the visual and daily maintenance inspections
by checking each item in sequence for the conditions
listed in this section.
wARNiNG
To avoid injury, do not operate a
telehandler until all malfunctions have
been corrected.
wARNiNG
To avoid possible injury, ensure telehandler
power is off during your visual and daily
maintenance inspections.
NOTE
While performing visual and daily
inspections in different areas, be aware
to also inspect all switches, electrical and
hydraulic components.
2.7-1 Labels
Refer to the labels section in this manual and determine
that all labels are in place and are legible.
2.7-2 Electrical
Maintaining the electrical components is essential to
good performance and service life of the telehandler.
Ensure proper operation of all gauges •
Check charging system Ammeter/Voltmeter •
Inspect the following areas for chafed, corroded •
and loose wires:
• boom wiring harnesses
• frame wiring harnesses
• cab wiring harnesses
Ensure electrical devices are properly secured with no
signs of visible damage. Ensure there are no loose or
missing parts.
2.7-3 Safety Switches
Ensure safety switches are properly secured with no
signs of visible damage.
2.7-4 Mirrors
Ensure mirrors are properly secured with no signs of
visible damage.
Boom
Assembly
Boom Angle
Indicator
Operator’s
Cab
Engine
Exhaust