Skyjack ZB12032, Руководство по эксплуатации

Страница: 25 / 73

TM
Page 26 December 2007
ZB12032
Section 2 - Operation Operator’s Responsibility
2.6 Operator’s Responsibility
It is the responsibility of the operator, prior to each work
shift, to perform the following:
1. Visual and Daily Maintenance Inspections
Designed to discover any damage of components •
before the telehandler is put into service.
Completed before the operator performs the •
function tests.
wARNiNG
Failure to locate and repair damage, and
discover loose or missing parts may
result in an unsafe operating condition.
2. Function Tests
Designed to discover any malfunctions before the •
telehandler is put into service.
impORTANT
The operator must understand and follow
the step-by-step instructions to test all
telehandler functions.
The operator should make a copy of the Operator’s
Checklist (see
Table 2.6 ) and fill out the visual and daily
maintenance inspections and the function tests sections
while performing the items outlined in
Section 2.7 and
Section 2.8 .
impORTANT
If telehandler is damaged or any
unauthorized variation from factory-
delivered condition is discovered,
telehandler must be tagged and removed
from service.
Repairs to the telehandler may only be made by a
qualified service technician. After repairs are completed,
the operator must perform visual and daily maintenance
inspections & function tests again.
Scheduled maintenance inspections shall only
be performed by qualified service technician (see
Table 2.5 ).