Skyjack ZB12032, Руководство по эксплуатации

Страница: 15 / 73

TM
ZB12032
December 2007 Page 15
Safety Rules Section 1 - About Your Telehandler
Safety Precautions (Continued)
Know and understand all safety precautions before going on to the next section.
wARNiNG
Entering and exiting the telehandler
should only be done using the three
points of contact.
• Use only equipped access openings.
• Enter and exit the telehandler only
when the boom is in the fully retracted
position.
• Do use three points of contact to enter and exit
the cab. Enter and exit the platform from the
ground only. Face the telehandler when entering
or exiting the cab.
• Three points of contact means that two hands
and one foot or
one hand and two feet are in
contact with the telehandler or the ground at all
times during entering and exiting.
wARNiNG
Operator should not use any telehandler
that:
does not appear to be working properly. •
has been damaged or appears to have worn or •
missing parts.
has alterations or modifications not approved by
•
the manufacturer.
has safety devices which have been altered or
•
disabled.
has been tagged or locked out for non-use or
•
repair.
bears an unapproved attachment.
•
Failure to avoid these hazards could
result in death or serious injury.
Jobsite Inspection
Do not use in hazardous locations. •
Perform a thorough jobsite inspection prior to •
operating the telehandler, to identify potential
hazards in your work area.
Be aware of moving equipment in the area. Take
•
appropriate actions to avoid collision.