16
LED Status Indicators
Button LEDs:
Both of Mode Dial LED and Button LEDs Repeatedly Blink 3 times: Indicate the Star
Adventurer 2i is ready for firmware update or firmware update is in progress.
Now is time to learn more about Star Adventurer 2i in each of following sections.
Mode Dial LED Off:
The Power is Off.
Mode Dial LED Solid On:
Power is on and system is
normal.
Mode Dial LED Slow Blink:
Low Battery Level. The red
LED blinks 2 times per second when the battery level is
lower than 4.6V, or USB power is lower than 4.4V.
Mode Dial LEDs Fast Blink:
The red LED blinks
3 times per second to indicate motor speed errors
exceeding 5% and/or motor stalls that last over 5
seconds. Speed errors can be caused by overloading
the mount and by low battery levels. To correct a speed
error reduce the load or supply new batteries. Motor
stalls are usually due to obstructions of the mount so
that it cannot rotate. In the case of motor stalls, remove
the cause of the block then restart your task.
For six preprogrammed function modes
(
, , ,
,
RT
and
LT
):
Button LEDs Solid On:
Motor status is normal
For APP mode:
Button LEDs Off:
Wi-Fi is turned off.
Button LEDs Blinking:
Wi-Fi is activated and ready for
connection.
Button LEDs Solid On:
Wi-Fi is connected and
Star
Adventurer mini Console
is connected and running
Mode Dial LED:
Mode Dial LED
Buttons
