28
dithering range may result in longer total task time,
but too small dithering range may result in poor
dithering effect after photo stacking. Please adjust
dithering range according to your condition. Due to
the nature of dithering,
Dithering only works when
Star Adventurer 2i control the camera shutter and
is not guided through Auto-Guiding Port.
WiFi Off on Run:
When enabled,
Star Adventurer 2i
will automatically turn off Wi-Fi at the start of a task to
save power. Wi-Fi can be restored at any time in
APP
mode by pressing the
Right/Left Button
until
Button
LEDs
start slowly blinking.
Profiles Save / Edit:
To save a profile tap
Save
. To edit
or delete a profile tap
Edit
. You can store your multiple
profiles of your favorite settings for recall at future
sessions.
Start the Task:
Cancel Current Task:
Astrophotography Progress Screen:
Once your tripod,
Star Adventurer 2i
and camera gear
are set up and all of your task parameters are set, just
press
Run
to initiate the task.
After your task started, you can cancel current task at
any time by tapping on
STOP
at the top-right corner
of the parameters screen. It brings up a confirmation
screen. You can cancel the
Stop
request and resume
the task or proceed to end the task at that point
Anytime you have a process running you can view its
progress by tapping on
Status
at the bottom of the
parameters screen. This brings up information about
number of photos taken, percentage of task complete,
etc.
