SKY-WATCHER Star Adventurer 2i, Инструкция по эксплуатации

Страница: 36 / 48

36
Tap on WiFi Network to bring up the Wi-Fi options as detailed below. You can choose
either Access Point (AP) Mode or Station (STA) Mode. Use AP mode for a basic
connection to Star Adventurer 2i . Use STA mode if you wish to control Star Adventurer
2i while simultaneously being connected to a wireless network (e.g., for internet access)
or want to control Star Adventurer 2i remotely via the internet. Be sure that you have the
correct STA SSID and Password information. If you enter the incorrect information you
may need to reset Star Adventurer 2i to its factory settings using the procedure outlined in
Appendix Ⅳ : How to Restore Factory Settings .
Access Point (AP) Mode: This is the default mode. In AP
mode Star Adventurer 2i acts as a wireless access point
so that you can connect to it via the Star Adventurer mini
Console .
AP Mode SSID: The SSID will automatically show up
based on the SSID you entered to make your initial Wi-
Fi connection. Select it to connect your device to Star
Adventurer 2i . Before attempting to connect be sure that
Star Adventurer 2i is at APP mode and the Button LEDs
are slowly blinking which indicates that Star Adventurer 2i
is ready to make a Wi-Fi connection.
AP Mode Security: Select Open if no encryption is to be
used. Otherwise, tap on the settings field and choose an
encryption type from the list, then enter the correct password
in Password .
Station Mode (STA): Choose this mode if you wish to have
internet access while using Star Adventurer 2i , control Star
Adventurer 2i via the internet, or to save battery power.
When you select STA mode Star Adventurer 2i will join
an existing Wi-Fi network. To use STA Mode, select it, then
set the SSID and Password for the network you are joining.
When all of your selections are made click on Apply . Star
Adventurer 2i will restart and join the network. The new
settings will be stored in Star Adventurer 2i ’s memory and
will remain there until the settings are changed.
STA SSID: Select the network you wish to join and enter the
SSID for that network.
STA Password: Enter the password for the network you
have selected to join.
STA Use DHCP: Turn this off ONLY if you want to set the IP
address manually
WiFi Network